Filter
Top Products
Press and hold [POWER] for two seconds or until the TRAV’LER interface
displays “POWER ON.”
Now that the power is on, release the [POWER] button.
Press and hold the [ENTER] button for two seconds.The TRAV’LER
interface will ask if you wish to enter the User Menu. Press [SELECT] to
choose “Yes”; then, press [ENTER].
The User Menu consists of four choices: Search Mode, Diagnostics,
Installation, and Exit. Press [SELECT] until the asterisk is next to
“Installation” and then press [ENTER].
The interface box will ask for a password. Press [ENTER] four times to
enter code “0000” on the display.
Press [ENTER] to choose “Select Antenna.”
Press [SELECT] until the asterisk is next to your mount type (SM Mount
or LG Mount), and then press [ENTER]. The mount type can be found on
the sticker on the TRAV’LER mount.
Selecting the incorrect mount type can result in damage to the unit or the RV.
Enter the four digit code for your mount type found on the sticker on the
TRAV’LER mount. Enter code 0022 for the SM mount or code 2112 for the
LG mount. Press [SELECT] to increase each number. Press [ENTER].
Press [SELECT] until the asterisk is next to DISH 1000. Press [ENTER].
Press [SELECT] until the asterisk is next to “Yes.” Press [ENTER].
The TRAV’LER interface box will display “in progress” and then “Success”.
Press [ENTER] and then choose [SELECT] until the asterisk is next to
Installation. Press [ENTER].
2
Setting the IDU for DISH 1000
1
3
4
5
6
7
8
9
10
11
12