Wintal PDVDX100S DVD Player User Manual


 
-11-
BASIC CONNECTION
C: Connection to audio system
1. DVD/DVB Combo Player
2. Audio system (optional)
3. Audio cords
4. Coaxial cable, to the audio system coaxial
input connector
5. Optical cable, to the audio system optical
input connector
6. To center audio input connector
7. To audio input connector (subwoofer, sur-
round left, surround right, front left, front
right).
Regarding the audio system connection to
other unit, please kindly refer to the audio
system instruction manual.
Relative setup
According to your audio system, it is ok that
you connect any of point 3/4/5.
When using 5.1ch analog to connect the audio
system, please set the submenu of analog out
under the menu of audio setup as 5.1 channel
Coaxial Digital Output Notice
Do not connect this unit’s coaxial digital output
to the amplifier which does not have AC-3 or
MPEG2. Otherwise it will cause extreme high
level noise and damage to your listening.
Optical Digital Output Notice
Take out the optical digital output protective
cap, and insert the optical cable into the unit’s
optical output hole and amplifier’s optical input
connector. Keep the protective cap well when
non-use. Put the protective cap onto optical
output in avoid of any damage to the eyes.
PDVDX100S-100B-im.p65 06-5-16, 11:3011