Filter
Top Products
-15-
OPERATION
(silence), press again to cancel MUTE. And press-
ing VOL+ or VOL can cancel MUTE also.
VOL+/VOL-
Press VOL+/VOL- button during playback may
change volume for audio output
Note:
1. The volume is set as largest initially.
2. VOL+/VOL- button will lose function when
using this digital output.
DISPLAY
Press DISPLAY button during play to show the
disc’s relevant information on TV screen.
ZOOM
Press ZOOM button during playback or pause to
zoom up the current picture. There are 3 levels of
zoom available (x1, x2, x3). Press continuously
to Q off to resume normal playing.
Note: Some discs have no such function or have
only x1 or x2.
A-B REPEAT
Press A-B button during playback at the point
where repeat play is to commence (a) then press
again at the point where repeat play is to be con-
cluded (B). Repeat playback between point (A)
and point (B) starts.
Press A-B button once more where TV screen
appears “REP OFF”
Note: Some DVD discs and all MP3, DIVX discs
have no such function.
MODE
Press MODE button during the playing to choose
different REPEAT modes.
Under DVD discs playback status, there are three
options available: Chapter/Title/Off.
Under CD discs playback status, there are three
options available: Single/All/Off.
Note: Some discs and cards have no such
function.
ANGLE
Press ANGLE continuously during playback of
DVD disc to toggle the disc between available
angles recorded on the disc if the disc has multi-
angle function.
AUDIO
Press AUDIO button during playback to toggle
between available audio languages recorded on
the disc if the disc has this multi-language function.
Note: Press AUDIO button could toggle available
audio language soundtracks.
PROGRAM
Press STOP button first then press PRG button,
the program playback screen appears on the TV
set. 12 tracks (CD) or chapters (DVD) can be
programmed. Use NUMBER button to input your
preferred track (CD) or chapter (DVD) when the
blue cursor flashes on the position1. Note: When
programming a DVD disc, you must input title num-
ber ahead of “:”and chapter number after it. It is
invalid to input the number larger than available.
Then press direction button (UP, DOWN, LEFT,
RIGHT) down to remove blue cursor to position 2.
Use the same procedure to program your pre-
ferred track or chapter. Use CLR button and enter
a new number to amend false or unsatisfied pro-
gram through direction button. After you have se-
lected all your preferred title/chapter(s) or track
(s), press OK button or just press PLAY button to
start program play.
Note:
1. Some discs have no program function.
2. No Search function during programming
playing.
MARK
Press MARK button on remote control while the
disc is playing and the menu of mark setting with
bookmarks will appear on the screen. Press “OK”
button to set the playing times where you would
like to view as mark. Once mark were set, press
OK button to play from the mark. Press “CLR”
button to clear a particular mark .A maximum of
three marks can be stored.
Note:
1. All the marks are cleared when the power is
off or the disc is removed.
2. Some discs including MP3, JPEG, DivX have
no such function.
VIDEO-OUT
This button provides you easy access to this unit’s
video output without need to enter SETUP menu.
Press continuously, it changes to following out-
put signals in turn: CVBS, YUV, YPbPr.
SEARCH
When you play a DVD disc, press the “SEARCH”
button and “Time/Title / Chapter” will appear on
the screen. Use the number buttons/direction but-
ton to set chapter or title. Press the OK button to
start playing from the selected point. Press
SEARCH button once again, it will cancel SEARCH
playback.
Note: Some discs have no search function.
PDVDX100S-100B-im.p65 06-5-16, 11:3115