Filter
Top Products
20
WINTAL PVR10HD USER MANUAL
3.7 CLOSED CAPTIONS
Closed Captions is an option to display text that provides additional or interpretive information no the currently
streaming program.
If you have set closed captions to “On” under General Setup, you can press the
CC key on your remote to turn
closed captions on or off.
Note: This function needs your local operator support.
3.8 PICTURE-IN-PICTURE (PIP)
PIP allows the display of two channels simultaneously. It is a useful feature where you may want to visually see
whether a program has returned from an ad break, or if you want to keep an eye out on a sports game while
watching another show.
3.8.1 ACTIVATE PIP
Before you can use the PIP function you must enable it in the settings.
Select
MEnu SEttINGS GENERAL SEttINGS and press the key to enter.
1. Highlight “PIP” and press the
key to pop
up a drop-down list.
2. Select “On” and press the
key to
confirm.
3. Press the
EXIT key and a message box
pops up for confirmation.
4. Select “OK” and press the
key to
confirm, and a reboot prompt pops up on-
screen.
5. Select “OK” and press key to reboot or
select “EXIT” and press OK key to cancel the operation.
Notes:
▪ This function is unavailable when certain screens are activated on the PVR10HD, such as the channel list screen, detailed information
window, etc. Just exit out to the main screen and try again.
▪ You can also press PIP key and activate PIP function when not in any menus.
▪ After making a change, please ensure you reboot the unit to have the PIP On or Off settings take effect.
IMPORTANT: PIP is not supported through Composite AV (CVBS) and S-VIDEO. Please make sure you connect via Component
or HDMI if you wish to use this feature.
If you have previously enabled PIP and connect your PVR10HD via composite or s-video, there will be no video output. If this is the
case, connect the receiver to a HDTV via YPbPr or HDMI and disable PIP following the instructions above.
3.8.2 SHOW/ HIDE PIP WINDOW
Press the
PIP key on your PVR10HD remote to show or hide the PIP window.
3.8.3 SWAP PIP WINDOW
Press the
P.SWAP key to switch the main window with the PIP window and vice versa.