Filter
Top Products
8
English
OPERATION
Preparation before playing disc
The option of display language catalog is preset to English. Please refer to Setup operation. Most of
functions are operated by remote control. Either operation of remote control and front panel is effected
when their buttons indicate the same function.
Preparation
• Turn the TV on and select AV as the TV input.
• Switch on the stereo system power if the player has been connected to stereo system.
• Connect AC power cord to AC outlet (AC230V, 50Hz).
• Switch on the power, the displayed LOAD on the LED indicates the normal power supply.
Note:
The disc information appears after several seconds if there is a disc after LOAD displayed otherwise
appears NO DISC)
Operation for DVD features
POWER ON
When you press the button on the front side, the player will switch to Standby status, then the power
indicator on the front panel will be light. When pressed again, the player is returned to normal working
status.
Note:
• Should you not wish to use the player, please switch off the power by pressing the power button.
OPEN and CLOSE the Loader
Press OPEN/CLOSE (19) button to open disc tray. OPEN will be indicated on the right upper of TV
screen. Place a disc (8cm or 12cm) onto the tray. (For one-sided disc, position it with printed title side
facing up. For two-sided disc, position side to be playback facing down). Press OPEN/CLOSE again to
close disc tray.
PLAY (30)
Press PLAY to playback disc. You may operate according to MENU (23) indication after MENU shows on
screen then press OK (8) button to playback. Some discs can play automatically after loaded. Switch off
the power via pushing the power button again, BYE will be displayed on VFD before shut down.
STOP (16)
Press STOP button to stop playing. When playback is stopped, the unit records the point where STOP
was pressed (RESUME function). Press PLAY again, and play will resume from this point. Press STOP
button twice, RESUME function will be cancelled. RESUME function is suitable for discs showing playing
time during playback.
Note:
• Some discs including MPEG4 discs have no such function.
SKIP– / SKIP+ (29)
Press SKIP– /SKIP+ button on remote control during playback. A chapter (DVD) or a track (CD) is
skipped back or ahead correspondingly each time the button is pressed.
F.FWD / F.RWD (15)
Press F.FWD/F.RWD button on the remote control during playback and the unit will enter fast forward/
reverse status There are 4 speeds of fast forward (reverse) available: ×2, ×4, ×8, and ×16. To return to
normal play, you can press again or press PLAY button on player or remote control.
Notes:
• Some discs have no such function
• For some MPEG4 discs, the speed levels of fast forward (reverse) will only have ×2, ×4, ×8.
Mark (26)
Press Mark button on the remote control during the disc is played and the menu of mark setting with 3