Filter
Top Products
MCX-2000 Owner’s Manual Addendum for Version 2
5
Updating the MusicCAST Client (MCX-A10 or MCX-C15)
Firmware
Do not disconnect the power cable while the MusicCAST client in the firmware is in the firmware
update procedure.
At times YAMAHA releases updates to the firmware in either or both the client and the server. These updates are generally
aimed at improving the experience of using your MusicCAST equipment. Follow the instructions provided with the
firmware update carefully. Do not use the update procedure unless specifically instructed to do so.
1 Update the server firmware in advance.
See page 4 for details.
2 Select “Top Menu” > “Setup” > “System” > “System
Update”.
The following illustration is an example of the message
appears in the front panel display of MCX-A10.
3 Press p on the front panel of the client (or p on the
remote control of the client) to start the firmware
update for the client.
The client receives the latest firmware from the server,
and then updates its own firmware. During the update
process, the client display shows several messages.
4 The client reboots automatically when the procedure
of the firmware update is complete.
n Once the client reboots, select “Top Menu” > “Setup” >
“System” > “Information” to make sure the version of the
firmware of the client is 10.2 (or later).
n If the firmware update fails, some functional defects in the client
may result. In such cases, try the firmware update procedure
again. If the same functional defects in the client persist,
contact with an authorized YAMAHA service center.
CAUTION
System
Update
Version: 10.0.3
Date: 2006/03/03
08:23:58
Press PLAY to update.
Client Firmware Version
Date and Time of the Firmware
Update for the Client