Filter
Top Products
To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 27.
• If your AV amplifier does not incorporate DTS decoder and you have connected this unit and the amplifier through
digital terminals, please make sure that the 'DTS Digital Surround' at 'Audio' SETUP MENU is set to PCM (factory-
setting). Otherwise, unprocessed digital signals will be output and its noise could damage your ears and your speakers.
Disc tray
4(PLAY)
• Preparation
Select DVD as the input source on your AV amplifier.
U Press POWER to turn the power on.
[] Press -_ (or OPEN/CLOSE) to open the disc
tray.
[] Load discs.
Use the disc guides (numbered, 1 to 5) to align the
discs correctly.
[] Press _ (PLAY).
The disc tray closes and playback starts. This unit plays
all discs on the tray in sequence.
• If necessary, select a desired disc using DISC SKIP or one of the
DISC 1, 2, 3, 4 or 5 buttons.
• When a menu screen appears _ _ _:
See 'Using a Disc's Menu' in p. 14.
(PLAY)
• When this unit finishes playing a DVD, this unit stops playback or
shows the menu screen and does not start playing the next disc.
• This unit cannot play a CD-R or CD-RW disc unless the disc has
been finalized. Please make sure to finalize the disc on the CD
recorder before playing it on this unit.
11