Filter
Top Products
Item Description Range Fact. Set Recommend. Setting
00 FACT MENU 0 - 1 0 Leave default set 0
01 PRESET PX 0 - 1 1
02 POWER MANAGE 0 - 7 0
03 VERT POS 0 - 30 15
04 HORZ POS 0 - 45 29
05 BAND/AFC 0 - 7 0
06 MIN VOLUME 0 - 63 0
07 MAX VOLUME 0 - 63 63
08 AC ON 0 - 1 0
9 KEY DEFEAT 0 - 1 0
10 STRT CH/VOL 0 - 255 255
11 HOSPITAL MODE 0 - 1 0 Leave default set 0
12 CHAN LOCK 0 - 1 0
13 GHOST CH. 0 - 1 0
14 SCAN MODE 0 - 3 0 Leave default set 0
15 TEXT MODE 0 - 1 1
16 SLEEP TIMER 0 - 1 1
17 ALARM 0 - 1 1
18 CH. OVER RIDE 0 - 1 1
19 OLD OCV 0 - 1 0 Set to 1 for old Spectramate systems
20 CAPTION LOCK 0 - 1 0
21 FUNCTION PRE 0 - 1 0
22 FEATURE LEVEL 0 - 1 1 Leave default set 1
PAGE 31
206-3489-O
Installer menus
Use the Installer menus to make adjustments
1390-00 0.00 01
03 VERT POS 13
XX/XX/9X TE11111111
Installer should leave item 1 FACT MODE
set to 0 (default). Items 23-52 are ser-
vice-type adjustments and only qualified
technicians having specialized test equip-
ment should access them.
Accessing the Installer menu
Installer menus can be accessed by using the installer’s remote control.
Just press and hold MENU (about 8 seconds) until the display changes,
then press 9, 8, 7, 6, then ENTER. To exit the Installer menu, press ENTER
again. Any changes you make will be stored in nonvolatile memory.
The Installer menu opens with item 03, VERT POS. Press the Up/Down
arrow keys to sequence through the various items. Or, access an item
directly by entering the line number, then pressing MENU. For example, to
access the Start channel/volume feature which is on line 11, press 11, then
MENU. To change a current setting use the Left/Right ADJ keys.
Using the Installer menu
Items 00-22 are immediately accessible only upon entering the Installer
menu. Their numbers, descriptions, ranges, factory default settings, and a
place for listing any changes made on-site are given below. A second sec-
tion of the Installer menu that is intended for qualified service technicians
only is not shown (items 23-52). Normally these items do not require
adjustment.
Items in the Installer menu: