Filter
Top Products
Auto Chapter
During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select “None”.
DISC
Disc Initialize
If you load a completely blank disc, the recorder will ini-
tialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The Initialize menu will appear. Select “VR
Mode” or “Video Mode” then press ENTER ().
Also, you can format the disc from the Setup menu as
below (DVD-RW disc only).
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the DISC option.
33
While the DISC option is selected, press B to
move to the second level.
44
Use v / V to select the “Disc Initialize” option.
55
Press B to move to the third level.
“Start” icon is highlighted.
66
Press ENTER (
).
Disc Initialize menu appears.
77
Use b / B to select a desired Disc Initialize
Mode (VR Mode or Video Mode) then press
ENTER (
).
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
24
Before Operation (Continued)
5 Min
10 Min
None
Disc Record Mode
VCR Record Mode
Auto Chapter
Prev. Select Close
Start
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
AutoPlay
Prev. Select Close
Video Mode
Select a mode.
Disc Initialize
VR Mode