Filter
Top Products
Before Operation (Continued)
Disc Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
DISC MENU/LIST or TITLE.
Caution
Once you have finalized a DVD-R disc, you cannot
edit or record anything else on that disc.
However, you can record and edit a DVD-RW disc
by choosing Unfinalize.
11
Follow steps 1-3 as shown on page 24 (Disc
Initialize).
22
Use v / V to select the “Disc Finalize” option.
33
Press B to move to the third level.
Finalize is highlighted.
44
Press ENTER (
).
Finalize menu appears.
55
Use b / B to select OK then press ENTER (
).
The VCR/DVD Recorder starts finalizing the disc.
Note :
Finalization can take up to 3-4 minutes or more depend-
ing on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
Tips :
•If you load a DVD-RW that has already been final-
ized, you can ‘Unfinalize’ it by choosing Unfinalize
from the Finalize menu. After doing this, you can edit
and re-record onto the disc.
•You cannot unfinalize a DVD-R disc.
Disc Protect
When recording in VR mode formatted DVD-RW disc,
set to ON to prevent accidental recording, editing or
erasing of the disc loaded.
If you need to unlock the disc to make edits, select
OFF.
AutoPlay
When you load a DVD with AutoPlay turned on, the
VCR/DVD Recorder will bypass the Disc menu and
trailers and start playing the movie automatically.
Set “AutoPlay” to ON or OFF.
DVR HOOKUP
25
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
Unfinalize
Finalize
AutoPlay
Prev. Select Close
OK
Do you want finalization?
Finalize
Cancel
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
ON
OFF
AutoPlay
Prev. Select Close
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
ON
OFF
AutoPlay
Prev. Select Close