Zenith XBR411 DVD VCR Combo User Manual


 
DVR HOOKUP
27
Before Operation (Continued)
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
VCR/DVD Recorder. Some DVDs require specific oper-
ation or allow only limited operation during playback.
When this occurs, the symbol appears on the TV
screen, indicating that the operation is not permitted by
the VCR/DVD Recorder or is not available on the disc.
Displaying Information on-screen
You can display various information about the disc or
tape loaded on-screen.
On-screen display operation
11
Press DISPLAY repeatedly to display/change the
information displayed on-screen.
22
To remove the on-screen display, press
DISPLAY or RETURN (O) repeatedly until it
disappears.
See the descriptions on pages 28 and 29 for
detailed explanations of on-screen displays for each
media type.
Notes :
Some discs may not provide all the features shown in
the on-screen display examples.
The on-screen display disappears automatically if no
button is pressed for seven seconds.
Temporary Feedback Icons
Resume play from this point
Action prohibited or not available
Displaying OSD While Watching TV
While watching TV, press DISPLAY to display/
remove the on-screen display.
For example, when a DVD-RW in VR mode is inserted, you
would see a screen similar to the fol-
low-
ing:
Changing TV Channels
If no disc is playing, you can change TV channels using
the number or CH/TRK (v / V) buttons on the Remote
Control, or the CH (v / V) buttons on the front panel.
Note :
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
Changing TV Audio Channel
Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown
below.
STEREO+SAP Audio Signal
Stereo SAP Mono Stereo
STEREO Audio Signal
Stereo L R Mono Stereo
SAP Audio Signal
Mono SAP Mono
MONO Audio Signal
Mono
The current audio channel is displayed on-screen.
If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio (Mono or
Stereo) channel.
If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
When an external input is selected, the audio channel
can be switched only to Stereo.
DVD-VR
VR Mode SP 1H 32M Free
10/08/2004Mono 11:35AM
MONO
DVD
Ch. 6
Indicates disc type.
Indicates channel
number and
audio input
signal received
by the tuner.
Indicates the Recording mode,
free space, and elapsed time
progress bar.
Indicates current date and time.
Indicates output audio signal.