A SERVICE OF

logo

PDS • User’s Guide 139
_K==oÉãçíÉ=`çåíêçä
Remote Commands
oÉãçíÉ=`çãã~åÇë
This section lists PDS remote commands, in the following categories:
Ethernet Commands
Input Commands
Output Commands
System Commands
LOGO Commands
bíÜÉêåÉí=`çãã~åÇë
ae`m
Description: Enables/disables DHCP mode.
Command Format: DHCP -m (mode)
Parameters: -m mode: 0-disable, 1-enable (default: on)
Query Format: DHCP -?
Query Response: DHCP -m (mode) --min 0 --max 1
bj^`
Description: Gets MAC Address.
Command Format: N/A
Parameters: N/A
Query Format: EMAC -?
Query Response: EMAC -a (addr)
Response Params: -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx