6 PDS • User’s Guide
NK==fåíêçÇìÅíáçå
Connectivity Diagram
`çååÉÅíáîáíó=aá~Öê~ã
The figure below illustrates a basic PDS system.
Figure 1-1. Block diagram, PDS system
In the diagram:
• Up to nine sources can be connected to the PDS:
~ 4 x analog inputs (on HD-15 connectors), for a variety of YUV and
RGBHV sources, including CVBS and Y/C.
~ 4 x DVI inputs, for computer sources. These four DVI connectors also
support analog RGB inputs, and these inputs are universal, and accept
all types of sources — just like the four HD-15 connectors. (To connect
analog sources, use a customer-supplied DVI to HD-15 adapter.)
~ 1 x SD-SDI, HD-SDI, or 3G-SDI input.
• The PDS 902 connects to a Preview monitor via analog or DVI.
• The PDS connects to a projector (or other target device) via analog or DVI.
In Chapter 2, refer to the “Inputs Section” heading on page 10 for details on all inputs.
^ééäáÅ~íáçå=nìÉëíáçåë
At Barco, we take pride in offering unique solutions to demanding technical problems. If you
have application questions, require further information or would like to discuss your
application requirements in more detail, please call (866) 469-8036. Our Customer Support
Engineers will be happy to supply you with the support you need. Refer to Appendix C,
“Contact Information
” on page 173 for details.
Inputs 1 - 4 (Analog)
Inputs 5 - 8 (DVI) **
Input SDI
Sample Source Input
Devices
Program
Ethernet
Serial
Preview
PDS-xxx
Sample Source Input
Devices
*
* Preview output not available on PDS 701 or 901.
** Inputs 7 and 8 not available on PDS 701.
