Setting up the DVD player
54
Unpacking
The 586 DVD Player comes in a box containing the following
components:
❍ Meridian 586 DVD Player.
❍ DVD remote.
❍ Meridian comms lead.
❍ Power cord.
❍ This manual.
If any of these items are missing please contact your dealer. We
suggest that you retain the packing in case you need to
transport the unit.
To position the DVD player
Do not place the DVD player:
❍ In direct sunlight.
❍ Near heat sources, such as a radiator.
❍ Directly on top of heat producing equipment, such as a power
amplifier.
In common with all CD and DVD players, the 586 DVD Player
emits some radio-frequency signals. You should therefore try to
keep all power cables and network leads away from signal
cables, including audio, antenna, and loudspeaker cables.
Radio interference
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in
accordance with our instructions may cause interference to
radio communications or radio and television reception. It has
been type-tested and complies with the limits set out in Subpart
J, Part 15 of FCC rules for a Class B computing device. These
limits are intended to provide reasonable protection against
such interference in home installations.
EEC: This product has been designed to comply with the limits
set out in EN55013 and EN55020C.
