A SERVICE OF

logo

Open as PDF
next previous
42
SX-200 ICP MX Technician’s Handbook
To install the optional DSP Modules:
1. Unplug the power cord from the controller.
2. Remove the top cover.
3. Repeat the steps below for each DSP module you install:
- Remove the DSP module from its packaging.
- Remove the blanking panel covering the Module Slot into which
you are installing the DSP Module.
- Remove the small PCB (
).
- Install the module cover on DSP module (
).
- Insert the DSP module in the appropriate slot.
- Secure the DSP module to the controller using the screws provided.
4. Replace the cover.