A SERVICE OF

logo

Open as PDF
next previous
76
SX-200 ICP MX Technician’s Handbook
2. In the server application,
- Create a User for password-protected logins or allow Anonymous
(no password required) logins.
The default database is programmed to allow Anonymous logins.
The default user name is FTP.
- Set up the paths to the directories you created in step 1.
- Enable read/write access to directories.
3. Restart the server.
Note: To verify that the FTP Server works, log into it from the PC. Go to the
CMD prompt (DOS) and enter ftp < IP Address of the FTP Server >. Look for
the message “Anonymous user logged in” or a prompt to enter a user name.