General Features
Features Guide 219
same UCD Group through Busy Lamp Field of the corresponding DSS button. UCD Login
Monitor is enabled or disabled by System Programming.
<For Incoming Group members>
Login/Logout status of the UCD Group members can be monitored by the extension
specified as the Supervisor Extension through Busy Lamp Field of the corresponding DSS
button.
• All Logout
All extensions in the Extension Group or Incoming Group can be logged-out.
This is determined by System Programming <Section 2.8 System Option, "Empty Group"
in the Programming Guide>.
If this feature is disabled by System Programming, the extension user cannot leave the
group (log-out).
At least one extension must be logged in.
However, this does not apply to Auto-Logout of the UCD group extensions.
Programming Guide References
• 2.3 Numbering Plan
– Login / Logout
– Group Login / Logout
•2.8SystemOption
– Empty Group
• 3.3 Extension Group
– [UCD Setting] LOGIN Monitor
• 3.5 Incoming Group
– [UCD Setting] Supervisor Extension
• 4.3 Extension Line
–COKey
Features Guide References
1.3 System Features
• Extension Group
• Incoming Group
• Phantom Extension
User Manual References
• 2.2.3 Flexible Button Assignment
• 3.2.5 [005] Flexible CO Button Assignment
• 4.3.45 Log-In / Log-Out
• 4.3.80 UCD Login Monitor
