General Features
296 Features Guide
1.15 Proprietary Telephone Features
Background Music (BGM)
Description
Allows the PT user in on-hook status to listen to Background Music (BGM) from the built-in
speaker of his PT.
Conditions
• Hardware Requirements
A user-supplied external music source, such as a radio, is required to utilize this feature. Up
to two music sources can be connected to the system.
• Tenant Service
If "Tenant Service" is utilized, a music source for BGM is determined by System
Programming on a tenant basis.
• Turning on / off
This feature can be turned on / off by pressing "1" while the extension is on-hook. If it goes
off-hook, BGM is suspended temporarily.
• Changing Music Source
Before changing the music source (MUS1 or MUS2) by software control, you must first
turn off the BGM at your extension; change the source; and then turn on the BGM again.
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
Installation Manual References
• 2.8.2 External Music Source
Programming Guide References
•2.2Tenant
– BGM Source
•2.8SystemOption
– Special dial tone after setting feature
Features Guide References
1.3 System Features
• Background Music (BGM)—External
•MusiconHold
