General Features
256 Features Guide
Call Forwarding—All Calls to an Incoming Group
Description
Allows you to have all calls to an Incoming Group forwarded to the pre-assigned Incoming
Group or Extension Group.
Conditions
• Types of calls which are forwarded by this feature are:
• Class of Service (COS) programming
COS programming <Section 2.4 Class of Service (COS), "Incoming Group FWD" in the
Programming Guide> determines the extension that can perform this feature.
The Call Forwarding setting extension varies depending on the following three modes:
Disable:
Disables this feature.
Own Group(s):
Enables forwarding all calls to other Incoming Groups or Extension Groups.
Only its own group(s) can be set as the Call Forwarding setting extension.
Any Group:
Enables forwarding all calls to other Incoming Groups or Extension Groups.
Any group can be set as the Call Forwarding setting extension.
• Forwarded call is not forwarded furthermore
There can be only one stage of Call Forwarding. If a call is forwarded to an extension in
Call Forwarding mode, the call is not forwarded furthermore.
• Group FWD button
Group FWD button can be assigned to a flexible (CO, DSS) button by Station, User or
System Programming.
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option , "15. Special dial tone after setting feature" in the Programming Guide>.
Call Type
Outside calls Direct Inward Dialing (DID) (ISDN);
Direct In Lines (DIL);
Direct Inward Dialing (DID);
Direct Inward System Access (DISA);
Intercept Routing;
Multiple Directory Number (MDN);
TIE;
Transfer
Intercom calls Extension;
Transfer
