General Features
Features Guide 93
7. Dial Number
Outgoing call: shows the other party's telephone number. Valid digits are 0 through 9, ,
#, P (if PAUSE button is pressed) or "=" (if a host PBX access code is entered).
Received call: shows <INCOMING>. If a Caller ID is assigned to the other party, it shows
<I>, number or name.
Timed Reminder: shows the detailed Timed Reminder information when the Timed
Reminder starts and it is answered or not answered.
Login / Logout:
<For Extension Group / Phantom Extension members>
shows the status of Login / Logout.
<For Incoming Group members>
shows the status of Group Login / Logout by specifying an Incoming Group with FDN or
all Incoming Groups with .
8. Ring: shows the ring duration of the incoming call in Minutes / Seconds.
9. Duration: shows the duration of the call in Hours / Minutes / Seconds.
10.Acct code (Account Code): shows the account code appended to the call.
11.CC (Condition Code): shows call handling type with the following codes:
TR: Transfer
FW: Call Forwarding to Trunk
D0: Non Security Trunk Access by a DISA caller
NN: DISA User Code No. (NN=01-32)
RM: Remote access to a modem
RC: Received an incoming call
AN: Answered an incoming call
NA: Not answered an incoming call
OR: COS Override
T0: TIE line access
Conditions
• When programmed for outgoing toll calls only, printing occurs only for calls which start
with the numbers stored in any Denied Code Table from levels 2 to 6. In the ARS mode,
the phone number modified by the ARS procedure will be printed out by SMDR.
• The KX-TD500 System can store up to 1000 call information data. If more than 1000 calls
are originated or received, the oldest data is overwritten by the newest one.
• It is possible to select whether SMDR prints out the Caller ID and DID information by
System Programming.
• It is possible to select whether or not the SMDR prints out received incoming calls (RC)
and answered incoming calls (AN) information by System Programming.
• SMDR data is not deleted when you reset the system.
• If FLASH is manually sent out during a call, the call record is printed and a new record is
started.
• If the calendar IC is out of order, " " will be printed out on "date" and "time" fields.
