In the above cases, the forwarding counter resets to zero, and the call can be forwarded up to four times
again from the destination extension described above.
Original
destination
Incoming
call
A B C D EF
123 21
FWD—No Answer
• Boss & Secretary feature
It
is possible to call the original extension from the destination extension regardless of the forward setting.
FWD—All Calls
Call or
transfer a call
Boss
(Original)
Secretary
(FWD destination)
Incoming
call
• Message Waiting
While calls are forwarded, Message Waiting information is not forwarded. The Message button light turns
on at the originally called extension. (® 11.1.3 Message Waiting)
• Idle Extension Hunting
Idle Extension Hunting applies to calls forwarded to a busy extension in an idle extension hunting group.
[All Calls and Busy]
• If the forward destination is not available to answer a call, this feature is canceled and the original
destination will ring for the following type of call:
– Doorphone call
– CO line calls via the ELCOT, LCOT, or T1 (LCOT/GCOT) cards
[No Answer and Busy/No Answer]
• No Answer Time
The number of rings before the call is forwarded is programmable for each extension.
[Follow Me]
• This feature is only available when the original extension has set "
Remote Operation by Other
Extension" to "Allow" through COS programming.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan
—Main—Features—
FWD No Answer Timer Set
4.11 [2-7-1] Class of Service—COS Settings
→TRS—
Call Forward to CO
→Extension Feature— Group Forward Set
→Extension Feature— Remote Operation by Other Extension
5.1 [3-1-1] Trunk Group—TRG Settings—Main
→
CO-CO Duration Time
→ Extension-CO Duration Time
5.12 [3-5-1] Incoming Call Distribution Group
—Group Settings
6.3 [4-1-2] Wired Extension—FWD/DND
120 Feature Manual Document Version 2008-11
6.1.6 FWD (Call Forwarding)
