Number in
the Pattern
Data Description
(9) CD (Condition
Code)
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (® 13.1.6 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
(10) Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR
[Programmable Items]
Item Description
Outgoing CO line call Controls whether outgoing CO line calls are shown. This setting is
common
throughout the PBX. COS programming is also required.
13.1 [11-1] Main—SMDR—
Print Information—Outgoing Call
[804] SMDR Outgoing Call Printing
Incoming CO line call Controls whether incoming CO line calls are shown.
13.1 [11-1] Main—SMDR— Print Information—Incoming Call
[805] SMDR Incoming Call Printing
Outgoing intercom call Controls whether outgoing intercom calls are recorded.
13.1 [11-1] Main—SMDR—
Print Information—Intercom Call
Log-in/Log-out status Controls whether the Log-in/Log-out status of extensions is
recorded.
13.1
[11-1] Main—SMDR—
Print Information—Log-in
/ Log-out
ARS dial Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.1.3 ARS (Automatic Route
Selection))
13.1 [11-1] Main—SMDR Options—
SMDR Options—ARS
Dial
Caller’s identification Controls whether the caller’s identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
13.1 [11-1] Main—SMDR Options—
SMDR Options—Caller
ID
Number & Name
Document Version 2008-11 Feature Manual 287
16.1.1 SMDR (Station Message Detail Recording)
