PT40 Communication
96 PT Program Generator (PPG) v5.0
Logging Tab
Select the Logging tab to establish settings for the communications log. The
communications log can be helpful as a trouble-shooting aid.
Figure 67. Logging Tab of the File Transfer Utility
Select OK to save the settings and close the setup functions.
Sending and Receiving Data
Verify that the portable is properly attached to the host PC. If the portable
uses a dock, make sure that the dock is properly attached to the PC.
Refer to Transmit (Send) Files, below for specifics on sending files. Refer to
Receive Files on page 98 for specifics on receiving files.
Log To File Specifies that the log is to be written to a text file.
Log To Screen Specifies that the log is displayed on screen.
Append to Log This option becomes available when you select
Log to File. When
enabled,
Append to Log adds log information to the end of the log
file. If not enabled, new log information replaces the previous log file.
Log Path/
Filename
Specify the location for storing the communications log. If a path is not
given, the file is stored in the
Default File Transfer folder.
Browse Use the Browse button to locate a new log file.
2342.book Page 96 Thursday, July 22, 2004 8:35 AM
