PPG Tutorial
122 PT Program Generator (PPG) v5.0
The Menu: Confirmation Node
Complete the following steps to set up this node:
1. Double-click on the
Menu: Confirmation node to open its dialog, and
enter the text shown in
Figure 95. Leave the second line blank.
Figure 95. The Menu: Confirmation Dialog
2. Enable the <F3> checkbox. Select Output to PC in the Next Node
column to begin data output when the user presses <F3>.
3. Select the
<F4> checkbox, and select Exit Main Menu from the
pull-down list. This will redisplay the
Main Menu when the user
presses
<F4>.
4. Press
OK to save your settings and exit the dialog box.
The Output: to PC Node
Complete the following steps to set up this node:
1. Select the
Output: to PC node to open its dialog (refer to Figure 96 on
page 123).
2. On the
Information to Output tab, select the Serial setting for Output
To Device
. This will send the output to the serial port of the portable,
which should be connected to the serial port of the PC.
When creating the Links from the Output: to PC node, create the Link to the Output:
Error Beep
node first. This Link will be selected for the Next Node/On Error option.
2342.book Page 122 Thursday, July 22, 2004 8:35 AM
