Building a Custom Portable Program
User’s Guide 123
Figure 96. The Output To: PC Dialog Box
3. From the Data Source pull-down list, select File. From the File
pull-down list select Monthly Inventory.
4. On the
Next Nodes tab, select Display Successful from the
Next Node field and Output Error Beep from the On Error
field.
5. Press
OK to save your settings and exit the dialog box.
The Output: Error Beep Node
Complete the following steps to set up this node:
1. Select the
Output: Error Beep node to open its dialog box.
2. On the
Information to Output tab, select System as the Output To
setting and Constant as the
Source setting.
3. Enter .+ in the
Source pull-down list. This is the code which tells the
portable to sound a high beep.
4. On the Next Nodes tab, select Menu Error Text for both fields.
5. Press
OK to save your settings and exit the dialog box.
The Menu: Error Text Node
Complete the following steps to set up this node:
1. Select the
Menu: Error Text node and enter the text shown in Figure 97.
2. Enable the
<F3> checkbox and select Output to PC from the
pull-down list to attempt a second output if the user presses
<F3>.
2342.book Page 123 Thursday, July 22, 2004 8:35 AM
