Creating New Nodes
User’s Guide 67
Figure 43. The Copy Node Properties Dialog
Copy From Tab
Data Source indicates the data to be copied—either a constant or the contents
of a register or file. If you choose
Constant, you are prompted for a number or
text string. If you choose
Register or File, you are prompted to specify a loca-
tion. For more information, refer to
Registers on page 78 and Files on page 81.
Copy To Tab
Data Destination indicates where the data is copied. Data can be copied to
either a register or a file. Select the destination from the available options. For
more information, refer to
Using a Register as a Destination on page 79 and Using a
File as a Destination on page 83.
Next Nodes
Next node specifies the next operation to go to when the verify function suc-
ceeds or fails.
Modify Nodes
Modify nodes let you change the contents of a register or file. You can switch
text to all uppercase or all lowercase, reverse the order of data, or delete data.
You can also perform a search-and-replace operation on data and clear the
eighth bit of data.
Figure 44 on page 68 shows the dialog box for a Modify node.
2342.book Page 67 Thursday, July 22, 2004 8:35 AM
