Pre-operation preparation
9
1
Follow steps 1 to 3 of the CLOCK SET procedure
2
Select LANGUAGE using the control button ({|)
and select the display language using the control
button (}~).
Once a language has been selected the display
language changes.
Language selection:
ENGLISH, 日本語 , DEUTSCH, Français, ESPAÑOL,
ITALIANO, ipllXTT ìRàX, 中文 （繁體） , POLSKI,
CESKY, óçhHBjlXT LRTX, Româna, Srpski, SVENSKA
Summer time setting is available.
1
Select D.S.T./SUMMER TIME using the control
button ({|) and select "ON" using the control
button (}~).
It becomes possible to input summer time.
2
Select "BEGIN" using the control button ({|) and
press the ENTER button.
D.S.T./SUMMER TIME BEGIN is displayed.
3
Input the starting date (31 March, 23:00).
1 Display "0" using the control button ({|) and move
to the right using the control button (}~).
2 Display "3" using the control button ({|) and move
to the right using the control button (}~), repeat to
set other settings and press the ENTER button.
The summer time input selection screen is displayed
again.
4
Repeat the procedure to input the end date (31
August, 23:00).
C
Setting the language (LANGUAGE)
SYSTEM
DVR ID DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT YYYY/MM/DD
CLOCK SET
PTZ CONTROL
LANGUAGE ENGLISH
REMOTE CONTROLLER ID 0
D.S.T./SUMMER TIME OFF
D
Setting the summer time
(D.S.T./SUMMER TIME)
SYSTEM
DVR ID DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT YYYY/MM/DD
CLOCK SET
PTZ CONTROL
LANGUAGE ENGLISH
REMOTE CONTROLLER ID 0
D.S.T./SUMMER TIME ON
BEGIN 2/1 0H
END 8/1 0H
Initial value
D.S.T./SUMMER TIME BEGIN
0 3 / 3 1 2 3 H
D.S.T./SUMMER TIME END
0 8 / 3 1 2 3 H
