SYSTEM settings
30
To set a password to enter the menu settings screen of this
unit. The initial value is "1111".
1
Select ADMIN PASSWORD using the control button
({|) and press the ENTER button.
The Current password input screen is displayed.
2
Input the current password (1111) using the camera
selection button (1) and press the ENTER button.
The New password input screen is displayed.
3
Input the new password (Example 2222) using the
camera selection button (2) and press the ENTER
button.
The Confirm password input screen is displayed.
4
To confirm, input the new password once again and
press the ENTER button.
The message "PASSWORD CHANGED!!" is displayed
so press the ENTER button.
If the password is incorrect the message "INVALID" is
displayed. Input the correct password again.
b Settings for no password
It is possible to enter the menu settings screen without
inputting a password.
1
Select ADMIN PASSWORD using the control button
({|) and press the ENTER button.
The Current password input screen is displayed.
2
Enter the current password using the camera
selection button (1/2/3/4) and press the ENTER
button.
The New password input screen is displayed.
3
Press the ENTER button without inputting
anything.
The Confirm password input screen is displayed.
4
Press the ENTER button without inputting
anything.
The message "PASSWORD CHANGED!!" is displayed
so press the ENTER button.
To go to the live screen, press the EXIT/STOP button.
D
Setting an ADMIN PASSWORD
If the password is input incorrectly the following
message is displayed, input the password correctly once
again.
"INVALID CURRENT PASSWORD"
ADMIN PASSWORD
Current:
- - - -
* * * *
ADMIN PASSWORD
New:
- - - -
* * * *
ADMIN PASSWORD
- - - -
* * * *
New:
ADMIN PASSWORD
Current:
- - - -
* * * *
ADMIN PASSWORD
- - - -
* * * *
Confirm:
