SYSTEM settings
31
b Restoring the password input
1
Press the MENU button, select SYSTEM and press
the ENTER button.
2
Select ADMIN PASSWORD using the control button
({|) and press the ENTER button.
The Current password input screen is displayed.
3
Press the ENTER button without inputting
anything.
The New password input screen is displayed.
4
Input the new password using the camera selection
buttons and press the ENTER button.
The Confirm password input screen is displayed.
5
Enter the same password as in New using the
camera selection button (1/2/3/4) and press the
ENTER button.
The message "PASSWORD CHANGED!!" is displayed
so press the ENTER button.
To go to the live screen, press the EXIT/STOP button.
A password can be set to limit the access to the network for
network users. The initial value is "1111".
1
Select NETWORK PASSWORD using the control
button ({|) and press the ENTER button.
The Current screen is displayed.
2
The following setting method is identical to the one
described in "Setting an ADMIN PASSWORD".
Refer to "Setting the clock (CLOCK SET)". (P7)
Refer to "Setting the clock (CLOCK SET)". (P7)
Refer to "Operating the PTZ camera". (P11)
Refer to "Setting the language (LANGUAGE)". (P9)
ADMIN PASSWORD
- - - -
* * * *
Current:
ADMIN PASSWORD
- - - -
* * * *
Confirm:
ADMIN PASSWORD
- - - -
* * * *
New:
E
Setting a NETWORK PASSWORD
F
Setting the DATE FORMAT
G
Setting the CLOCK SET
H
Setting the PTZ CONTROL
I
Setting the LANGUAGE
NETWORK PASSWORD
Current:
- - - -
* * * *
