Recording
14
An external sensor can be connected to each channel.
1
Connecting an external switch to an external
sensor terminal.
2
Set the following items using the control button
({|}~).
3
Select RECORDING using the control button ({|)
and select BY EXT. SENSOR using the control
button (}~).
4
Select SENSOR TYPE using the control button
({|) and select detection mode using the control
button (}~).
5
Select PRE RECORD using the control button ({|)
and select the pre recording as necessary using the
control button (}~).
6
Select POST EVENT RECORD using the control
button ({|) and select the recording time as
necessary using the control button (}~).
Selections: 2 - 30 SECONDS
7
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
b Output settings at the time of external switch
operation
When a motion sensor of this unit or an external sensor is
activated, a relay signal is output to the external alarm device
connected to the ALARM OUT terminal. It is normally open.
1
Connecting an external alarm to the OUT terminal
of the external sensor.
2
Select ALARM using the control button ({|) and
select ON using the control button (}~).
3
Select ALARM DURATION using the control button
({|) and select the alarm signal output duration
using the control button (}~).
Selections: 1 - 60 SECONDS
4
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
D
BY EXT. SENSOR recording
• RESOLUTION
• CHANNEL
• FRAME RATE
•QUALITY
POWERMODEAUTOMENU
1234
OUT
Camera
(Sold separately)
Monitor
(Sold separately)
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1 f/s
QUALITY NORMAL
RECORDING BY EXT.SENSOR
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
POWERMODEAUTOMENU
1234
OUT
Camera
(Sold separately)
Monitor
(Sold separately)
Maximum current:
0.5A/125V AC
Maximum voltage:
1A/30V DC
Power
source
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1 f/s
QUALITY NORMAL
RECORDING BY EXT.SENSOR
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
