39
Operations using the Network
This unit can be operated from a PC screen by using the supplied network operation software "Sanyo DVR Utility 2004".
Prior to performing network operations make the following preparations.
• Network connection:
Connect this unit and the PC using a LAN or Internet
connection. (P5)
• Network settings:
Set the network connection settings on the NETWORK
screen of this unit. (P33)
•CPU: Intel Pentium4 1.2 GHz or higher
• Memory: Minimum 256 MB
(512 MB or higher recommended)
•VGA: 16 MB (64 MB recommended)
• Resolution: 1024 × 768
• Disk capacity: 10 MB
• Operating System:
Windows 2000 Professional SP4/
XP Professional SP2/XP Home
Direct X: Direct X 8.1 or above
Install using the interactive screen.
1
Insert the supplied CD-ROM in the CD drive and
double-click "Sanyo Client.exe".
The installer runs.
2
Confirm the installation destination folder on the
"Choose Destination Location" screen and click
[Next].
To change the installation destination folder, click
[Browse] and select a folder.
Connection and settings
Operating environment
Installing "Sanyo DVR Utility 2004"
