G7 ASD Operation Manual 57
MONITOR SETUP
Trip Monitor from ASD Fourth Most Recent N/A
Scrolling Monitor Select
Scrolling Monitor Select N/A
SPECIAL CONTROL
PARAMETERS
Frequency Control
Start Frequency F240
End Frequency F243
Run Frequency F241
Run Frequency Hysteresis F242
Jump Frequencies
Jump Frequency Bandwidth Settings F271
Jump Frequency Processing Selection F276
Carrier Frequency
PWM Carrier Frequency Setting F300
Accel/Decel #1 – #4
Settings
Accel/Decel/Pattern #1 Configuration F009
Accel/Decel/Pattern #2 Configuration F500
Accel/Decel/Pattern #3 Configuration F510
Accel/Decel/Pattern #4 Configuration F514
Accel/Decel Special
S-Pattern Lower Limit Adjustment F506
S-Pattern Upper Limit Adjustment F507
Accel/Decel Time Lower Limit F508
Accel/Decel Switching Frequency #1 F505
Accel/Decel Switching Frequency #2 F513
Accel/Decel Switching Frequency #3 F517
Display Resolution F704
Crane/Hoist Load
High-Speed Operation at Light Load F330
Light-load High-speed Operation Switching
Lower Limit Frequency
F331
Light-load High-speed Operation Load
Waiting Time
F332
Light-load High-speed Operation Load
Detection Time
F333
Light-load High-speed Operation Heavy Load
Detection Time
F334
Switching Load Torque During Forward Run F335
Heavy Load Torque During Acceleration in
the Forward Direction
F336
Heavy Load Torque During Deceleration in
the Forward Direction
F337
Switching Load Torque During Reverse Run F338
Heavy Load Torque During Acceleration in
the Reverse Direction
F339
Heavy Load Torque During Deceleration in
the Reverse Direction
F340
Frequency for Automatic High-speed
Operation at Light Load
F341
Backlash Setup Not available at the time of this release. N/A
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
