A SERVICE OF

logo

4.8 Keyboard 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-31
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-14 to 4-16.
1. Place the keyboard face down on the palm rest and connect the keyboard flexible
cable to the connector CN3230 on the system board.
2. Turn the keyboard face up and set it in place. Extra portion of the keyboard cable
must be put under the cover assembly.
3. Secure the keyboard with the following screws.
M2.0×3C BIND screw ×2
4. Set the KB holder and press to secure the latches.