A SERVICE OF

logo

4 Replacement Procedures 4.23 LCD unit
4-94 CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
6. Peel off the LCD mask cushions and remove the following screws.
M2.5×5B FLAT HEAD screw ×2
7. Make the brake hinge R flat and remove the LCD mask while releasing the latches.
NOTE: Release the latches from the outside of the LCD mask.
Release the latches in the order of the number on the Figure 4-54.
Figure 4-54 Removing the LCD mask
M2.5x5B FLAT HEAD
M2.5x5B FLAT HEAD
LCD mask cushion
LCD mask cushion
LCD mask
Brake hinge R