A SERVICE OF

logo

4 Replacement Procedures 4.17 Jack/3G/Express board/Microphone/3G card
4-60 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
4. Take out the microphone from the slot of the base assembly.
5. Remove the jack/3G/Express board (with the microphone).
6. Disconnect the jack/3G/Express board FPC from the connector CN9630 on the
jack/3G/Express board.
7. Disconnect the microphone harness from the connector CN6070 on the
jack/3G/Express board.
Figure 4-34 Removing the jack/3G/Express board (2)
CN6070
Microphone harness
Jack/3G/Express board FPC
CN9630
Jack/3G/Express board
Microphone