A SERVICE OF

logo

4.24 Camera module/Wireless LAN antenna/3G antenna 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-107
5. Peel off a protection sheet from a new camera module.
CAUTION: Peel off the protection sheet with care of the followings:
6. Stick the camera cushion and square cushion on the LCD mask.
NOTE: Stick the camera cushion and square cushion as shown in the figure below.
7. Connect the camera harness to the connector on the camera module and set the
camera module to the slot of the LCD cover.
8. Arrange the camera harness in place.