A SERVICE OF

logo

4.20 CPU/Fin/DC fan 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-79
10. Set the fin (with the DC fan) in place and secure it with the following screws.
M2.0×4B BIND screw ×8
NOTE: When securing the fin, be sure to secure the screws in the order of the number
marked on the fin.
In models without a VGA, make sure that the gum sheet VGA is set on the system
board in place.
11. Connect the fan harness to the connector CN3380 on the system board.