A SERVICE OF

logo

4.14 RTC battery 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-53
4.14 RTC battery
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the laws and ordinances of your local
authority.
Removing the RTC battery
To remove the RTC battery, follow the steps below and refer to Figure 4-30.
1. Peel off the acetate tape.
2. Disconnect the RTC battery harness from the connector CN9300 on the system
board.
3. Open the insulator (RTC BATT INSULATOR) and take out the RTC battery.
Figure 4-30 Removing the RTC battery
Insulator
(RTC BATT INSULATOR)
RTC battery
CN9300
RTC battery harness
Acetate tape