Broadband VPN Gateway User Guide
Load/Backup Screen
Use the Load/Backup link on the Setup menu. An example screen is shown below.
Figure 10: Load/Back Screen
Data - Load/Backup Screen
Administration
WAN
There are 3 modes:
1. If Enable is selected for WAN 1, then choose Backup for WAN 2.
2. If Load Balance is selected for WAN 1, then choose Load Bal-
ance for WAN 2.
3. If Backup is selected for WAN 1, then choose Enable for WAN 2.
Auto
Equilibrium Type has 2 options:
• Determine by Bandwidth: If selected, enter the desired values of
WAN1 and WAN2 Bandwidth.
• Connection balanced automatically: Enter the percentage in the
Primary Port Proportion field.
Exceptions
Set up "Local IP Range", "Remote IP Range" or "Remote Port" to
direct the connection through secondary port.
18
