Broadband VPN Gateway User Guide
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the Broadband VPN Gateway will act as a DHCP
Server.
Restart your PC to ensure it obtains an IP Address from the Broadband VPN Gateway.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the following changes.
1. The Default Gateway must be set to the IP address of the Broadband VPN Gateway. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the Broadband VPN Gateway 's IP address, as
shown in Figure 17 below.
• If necessary, use the Up button to make the Broadband VPN Gateway the first entry in the Gateways list.
Figure 17 - Windows NT4.0 - Add Gateway
2. The DNS should be set to the address provided by your ISP, as follows:
• Click the DNS tab.
• On the DNS screen, shown below, click the Add button (under DNS Service Search Order), and enter the DNS provided by
your ISP.
24
