Broadband VPN Gateway User Guide
Define Firewall Rule (Inbound/Outbound)
Clicking the "Add" button in the Firewall Rules screen will display a screen like the example below.
Figure 36: Define Firewall Rule
Data - Define Firewall Rule Screen
Name
Enter a suitable name for this rule.
Port
Select the desired port as required.
Type
This determines the source and destination ports for traffic
covered by this rule. Select the desired option.
Source IP
These settings determine which traffic, based on their source IP
address, is covered by this rule.
Select the desired option:
• Any - All traffic from the source port is covered by this rule.
• Single address - Enter the required IP address in the "Start IP
address" field". You can ignore the "Subnet Mask" field.
• IP Address List - If this option is selected, choose the re-
quired option.
58
