Filter
Top Products
Configuration Procedure 25
b In the AuthRemoteUser field, enter the username and
password for office B (the office remote from you) in
quotes. For example, enter:
"OfficeB" "passwordB"
c Click Apply.
6 Enable port control to establish PPP connectivity using
access security.
a In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PORT CONTrol link.
b In the start field, choose 4.
c In the CONTrol field, choose Enabled.
d Click Apply.
Continue with the Office B configuration.
Office B Configuration
When you or someone else is setting up Office B, all the
configuration steps in the guide need to be performed on
the OfficeConnect NETBuilder bridge/router located in that
office. Then at the Office B location, the user names and
passwords must be entered to establish remote access
security.
For remote access security at Office B, assign passwords
and usernames to your OfficeConnect network.
To configure PPP authentication for office B, follow these
steps:
1 Return to the Web Link home page by clicking Web Link in
the banner.
2 In the navigation frame, click the Configuration link.
3 In the navigation frame, click the IP Routing link.
4 In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PPP AuthLocalUser link.
a In the start field, choose 4.
OC10.book Page 25 Thursday, May 13, 1999 2:33 PM