Filter
Top Products
6
C
ONFIGURING
Y
OUR
O
FFICE
C
ONNECT
NETB
UILDER
10 B
RIDGE
/R
OUTER
The instructions in this guide describe how to configure
Office A. After you’ve completed the configuration for
Office A, the same configuration steps need to be
performed at Office B.
This guide has the following sections:
■
Prerequisites
■
Preconfiguration Set Up (which includes installing the
OfficeConnect hardware)
■
Configuration Procedure
Prerequisites
Before you begin installing and configuring your
OfficeConnect bridge/router, you must satisfy the following
prerequisites:
■
You must have a PC on your network that will function
as your network management station (NMS).
■
This NMS must have browser software that is
compatible with Web Link: either Netscape Navigator
4.08 or later, or Microsoft Internet Explorer 4.01 or
later.
Web Link is the web-based network management
application that comes with your OfficeConnect
NETBuilder bridge/router.
■
You need to obtain IP addresses and subnet masks for
your network.
■
You will also need to order a leased line and an ISDN
line from your telco provider or providers.
When your ISDN line is installed you will receive
information regarding the ISDN dial numbers, ISDN
switch type, and SPID numbers. Retain this information
for use during configuration.
OC10.book Page 6 Thursday, May 13, 1999 2:33 PM