Filter
Top Products
16
Chapter 2 - Connections
GDV-870 Owner’s Manual
Power Connections
When all connections are complete, you’re ready to
check the voltage switch, plug in the power cable,
and power on the GDV-870.
Checking the Voltage Switch
Before plugging in the unit, make sure the voltage is
set to your country’s voltage configuration. The GDV-
870 should be unplugged prior to flipping this switch.
If you are uncertain, please have your installer or
dealer verify before proceeding.
1 To prevent damage to your equipment, make sure
the rear panel voltage switch is set correctly for
your geographic region.
• Select 120V for U.S. and Canada.
• Select 230V for EU and Australia operation.
• For other regions, check with your local au
-
thorities.
Connecting the Power Cable
Use to connect the supplied IEC removable AC power
cord. Before proceeding, please observe all precau
-
tions when connecting devices to your new GDV-870.
2 Connect the supplied power cable to the AC input
and plug it into an electrical outlet.
Turning on the Power
Setting this button to the on position (|) supplies
power to the unit, enabling use of the Standby button
on the front panel. When the main power switch is in
the off position, current is cut off to the unit.
3 Turn on the main power switch.
• This switch effectively connects or dis
-
connects the GDV-870 from the AC power
source.
Notes:
• Caution: Before you plug the power cord into an AC wall outlet, confirm that all connections to the
GDV-870 have been made correctly.
• Warning: Never disconnect the power cord from the GDV-870 while the other end is plugged into an
AC outlet. Doing so may cause an electric shock. Always connect power by plugging into the AC outlet
last and disconnect by unplugging from the AC outlet first.
• Do not use a power cord other than the one supplied with the GDV-870. It is designed for use with the
GDV-870 and should not be used with any other device.
Voltage
Switch
Main Power
Switch
AC
Input