Filter
Top Products
About the symbol display
The symbol will be displayed on the screen if
your operation is prohibited by the unit or the
disc.
Removing the disc
Caution
Make sure that the disc stops and is
completely still before you remove the disc.
If you touch the spinning disc, you may
hurt your finger.
1 Press s to stop playback.
2 Put your finger on the pit DISC OPENi on
the left side of this unit and open the disc
cover.
3 Remove the disc from the groove.
Do not touch the surface of the disc.
4 Close the disc cover.
CONTINUE
groove for 12cm disc
groove for 8cm disc
ENGLISH
12
NOTES
• During playback, some of the basic functions
may not work with some DVD discs. This is
not a malfunction. Operate it referring to the
instructions of the discs.
• When the display panel is closed, the liquid
crystal display and the speakers are turned
off.
• When you do not use the liquid crystal display,
close the display panel to save AC power or
the battery pack. Make sure that the display
panel is locked with a click.
• During playback of an audio CD, set the
display mode of the liquid crystal display to off
to save AC power or the battery pack. (See
page 14).
• A disc with the function to change the
language in its menu may not be played back
correctly. In this case, start play from the
menu, then return to the menu and change the
language.