Filter
Top Products
ENGLISH
23
BASIC OPERATIONS
En
Getting ready to play
•Turn on the TV, and set its video source (Video 1, Video
2, Video 3, etc.) to the one connected to the unit.
•Turn on the audio equipment connected to the unit. Set
its input source to the one connected to the unit.
Loading discs
1
Press POWER.
The unit turns on and the 6STANDBY/ON indicator turns
green. The “aiwa” screen appears on the TV screen.
2
Press z OPEN/CLOSE.
The disc compartment opens.
3
Load a disc in the tray at the center
position.
Place a disc in the tray guides (round slotted area) with the
label side facing up. When loading an 8-cm disc, place it in
the inner slotted area correctly.
4
To load another disc, press DISC SKIP.
The disc trays rotate and the next tray comes to the center
position.
Place a disc in the tray.
Repeat this step to load other discs (up to five discs).
Now you are ready to start playback.
NOTES
• Do not shock or vibrate the unit while playing.
• Do not push or shock the disc compartment while rotating
the disc trays.
•Do not put any objects other than discs on the disc trays.
About the symbol display
• The symbol will be displayed on the TV screen if
you press a button which cannot be used or enter an
invalid number.
•Some DVDs may have places where they do not allow
pressing certain buttons. The symbol will be
displayed on the TV screen if you press a button that
is not allowed in such a place.
Playback
12
4
1
2
3 4
CONTINUE
6STANDBY/
ON indicator