Filter
Top Products
18
SELECTION OF INPUT MODEPOWER ON, OFF
6. Basic Operation
6.1 Power ON/OFF: The Display is in
Standby mode
- Press the POWER on the remote control or
Standby on the control panel to turn on the
unit. The power indicator changes from red to
green.
- Press the POWER on the remote control or
Standby on the control panel again to return
the display to standby mode.
The power indicator changes from green to
red.
Note: Press CH +/- on the remote control can
turn on TV set from last preview mode.
For protecting your LCD TV product, the
interval time between turn on the LCD TV
product and shut down it should be kept
at least one minute.
6.2 Selection of Input Mode
- Press SOURCE / on the remote control or
on the LCD TV control panel to select the
signal source you desired.
When no input from the selected signal
source, “Main no signal” will appear, press
SOURCE / on the remote control or on the
control panel again to search the next source.
Note: The LCD-TV will automatically turn itself
off after approximately 15 minutes if no
signal input. When no signal is inputed for
about 14 minutes. A “No signal and going to power down” wording will appear.You
can press “◄” or “►” button to selected, press “ENTER” to confirm. If select “Cancel”
or no operation, the LCD-TV will automatically turn off after 1 minutes, if select “OK”,
it will turn off immediately.
(Continued on next page)
6.3 Other Function
FAVORITE:
- Press FAVORITE button repeatedly, you will cycle through Favorite Channel.
ADD/ERASE:
- Press this button to add/erase current channel to/from the list of favorite directly.
Add current channel into the list of favorite if a heart shape mark displaying on
the left top of screen.
Erase current channel from the list of favorite if a broken heart shape mark
displaying.
POWER
SOURCE
FAVORITE
ADD/EARSE
◄,► ENTER
CH+/CH-
OTHER FUNCTION