Alpine DVA-9861 DVD Player User Manual


 
31-EN
01GB05DVA9861.fm
ALPINE DVA-9861 68-04123Z61-A (EN)
Custom Setup Operation
Custom Setup Operation is performed by the remote control unit.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
2
Press or to select “CUSTOM SETUP,” then
press ENT.
3
Press or to select your desired setting item,
then press ENT.
4
Press or to change the setting, then press ENT.
5
When the setting is complete, press SETUP.
The setup returns to normal mode.
When settings are changed, old settings are overwritten. Make a note
of the current settings before making changes. If the vehicle’s battery
is disconnected, the settings will be cleared and will return to the
factory settings.
Setting the DVD Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A PLAY MODE
Setting contents: VIDEO/VCAP/VOFF
Perform this setting before inserting a disc. If a disc has already been
inserted, perform the setting after you remove the disc.
Setting the CD Play Mode
The unit can be set to play only the audio data or only the MP3/WMA
files on discs containing both audio data and MP3/WMA data.
Setting item: CD PLAY MODE
Setting contents: CD-DA/COMPRESSED
If a disc has already been inserted, perform the setting after you
remove the disc.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON/PBC OFF
Playing the Bonus Group
In addition to the usual group, DVD Audio also includes an addition
Bonus Group. When the Bonus Group is selected, although the
password input screen is displayed, you can pre-input a 4-digit
password.
If the Bonus Group password differs from the password in the section
you set, the input screen is automatically displayed.
Setting item: BONUS CODE
Setting contents: CODE
1 Press or to select “BONUS CODE,” then press ENT.
2 Use the numeric keypad “0” to “9” to input the 4-digit
password, then press ENT.
Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
Press RETURN to return to the previous screen.
3 When the setting is complete, press SETUP.
The setup returns to normal mode.
Custom Setup
The following 5 steps are common to each of the Custom Setup
settings. Refer to the specific section for details.
CUSTOM SETUP items:
DVD-A PLAY MODE / CD PLAY MODE / VCD PLAY MODE /
BONUS CODE
RETURN
SETUP
ENT.
CLR
Numeric
keypad
(0 to 9)
LANGUAGES
CUSTOM SETUP
SETUPAUDIO
TV SCREEN
6
SETUP
PARENTAL
OFF
EN
19
WIDE
CUSTOM TUPSE
CD PLAY MO EDCOMP
P
RE SS
SETUP
V
V
C
VC
DPLAYMOEDPBCON
D–ADPLAYMOED
A
BO USNCOED
VIDEO: Only DVD Video is played back if the
disc contains DVD Video and Audio.
VCAP: DVD Audio is played back with Video.
VOFF: DVD Audio is played back without Video.
The initial setting at the factory is VCAP.
CD-DA: Only CD data can be played back.
COMPRESSED: Only MP3/WMA data can be played
back.
The initial setting at the factory is CD-DA.
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.
01GB00DVA9861.book Page 31 Tuesday, December 6, 2005 3:41 PM