Filter
Top Products
6
Note
A point to notice
Info.
Supplementary informationBasic Functions
Tapes can be loaded into your VCR as long as the VCR is
plugged into an outlet. Even if the VCR is turned off, loading a
tape will automatically cause it to turn on. Use only video
cassette tapes marked
or .
Important notice:
• Use high grade (HG) tapes for super resolution
recording. We recommend to use S-VHS tapes for
super resolution recording at L18H-L40H mode.
• It is recommended to use T-120 tape. Do not use
tapes longer than T-160.
Loading
1. Insert the tape into the cassette
slot by holding it so that the long
narrow edge with the contents
label faces towards you.
• The Cassette Status indicator
illuminates on the fluorescent
display when the tape is
inserted.
Note
• Your VCR has a protection circuit
which will eject the tape if it is
loaded improperly. If the VCR
ejects the tape, remove it
completely and check that the long
narrow edge with the contents label
is facing towards you, and the clear
plastic window that shows the
video tape is facing upwards. Wait
a few seconds, and try inserting the
tape again.
Info.
• The VCR automatically turns on when the tape is loaded,
AUTO POWER ON.
• The VCR automatically plays back the tape if the erase
prevention tab is removed, AUTO PLAY.
• You cannot insert a tape when all of the VCR’s all buttons
are locked and the Lock All indicator ( ) is illuminating.
Unloading
1. Press EJECT button on the front
panel of the VCR.
2. Remove the tape.
Note
• When ejecting the tape during recording, press STOP button
once to stop recording and then press EJECT button to
unload the tape.
• You cannot eject a tape when all of the VCR’s buttons are
locked and the Lock All indicator (
) is illuminating.
Info.
• The VCR will eject a tape even if the power to the VCR is
turned off (as long as the VCR is plugged into an outlet),
POWER OFF EJECT.
erase
prevention
tab
Loading/Unloading a Tape
6H
L18H
L30H
48H
72H
96H
0H
100
60
25
20
15
15
1
Recording
time mode
Number of
tape use
8H
L24H
L40H
64H
96H
128H
0H
50
30
10
5
3
3
1
Recording
time mode
Number of
tape use
In case of T-120 setting In case of T-160 setting
INCORRECT
Preventing accidental erase
Tapes come with an erase prevention
tab which, when removed, prevents the
tape’s contents from being erased or
recorded over. If the tape you insert in
the VCR has the erase prevention tab
removed, your VCR will automatically
eject it if you attempt to record on it.
Note
• We recommend that you take any broken or torn tapes to a
professional for repair. The adhesives on many common
types of tape could damage the head of your VCR.
Recommended number of tape use
It is recommended that the cassette tape be replaced with a
new one depending on the recording time mode and type of
tape used. Providing TAPE LENGTH of FIRST TIME SET UP
menu is set to the same type the tape you use.