Filter
Top Products
54-0376
7.3
Using Access Controls
7-1 Locking & Unlocking the System
You can easily set limits to restrict the viewing of
satellite TV programming. When accompanied by the
channel lists, these limits provide a great degree of
control.
When you first install the mobile receiver, it will be
unlocked. That is, no limits or restrictions are in
effect. To enforce limits (ratings, TV timer, and
“Family” favorite list), you must lock the system
using a passcode.
Locking the Receiver
To lock the system, follow the steps below.
1. Press the MENU button to access the main menu.
2. Highlight the Lock & Limits tab and press
SELECT.
3. Highlight the Lock tab to display the Parental
Lock pane.
4. Highlight the Lock button and press SELECT.
PARENTAL LOCK
Ratings
Lock
Fav Setup
Limits
Watch TV
Main Menu
Enforce rating, spending, and
viewing limits, and restrict
access to Family list channels.
Enter the 4 digit passcode to
lock(unlock) your receiver.
Lock
Wed, Jul 18 9:15 AM
Lock
Cancel
OK
LOCK SYSTEM
Passcode
* * * *
Lock
Cancel
OK
CONFIRM PASSCODE
Passcode
* * * *
Parental Lock
Once the system is locked, only existing
Family list channels will be accessible. If the
Family list does not contain any channels,
no channels can be viewed without first
unlocking the system. To avoid this, verify
the contents of the Family list before locking
the receiver. See
Section 6-1, “Using
Favorite Channel Lists,” on page 6.3
for
details.